The Six-Pack is the super enthusiasts multi tool. The most common hex wrench size on a bike is a 5mm so they made the driver for the chain tool a 5mm with a 5.0 x 0.8mm flat blade screwdriver on the other side. All the limit screws and most accessory screws accept a flat blade screwdriver and 5.0 x 0.8mm is the most common size. Also has spoke wrenches on the handle of the chain tool to get the wheels spinning between the brakes after any mishaps. The 5mm hex/screwdriver has convenient holder to keep things from being misplaced.

Pedro's folding hex set multi-tools are essential for the shop, event, ride, and at home.  These folding hex wrench sets feature tools made from heat-treated tool steel for strength, superior anti-corrosion finish for unmatched long-lasting performance, and handles made of lightweight but super tough composite material.

The SW-19 offers an extra long reach (3.25"/ 8.5m) for those deep section aero rims. Featuring our dual-density ergonomically-designed screwdriver handle.

The SW-17 offers an extra long reach (3.25"/ 8.5m) for those deep section aero rims. Featuring our dual-density ergonomically-designed screwdriver handle.

The SW-16.3 offers an extra long reach (3.25"/ 8.5m) for those deep section aero rims. Featuring our dual-density ergonomically-designed screwdriver handle.

The Master Spoke Wrench is an investment cast workhorse poured from the best steel, precisely machined, heat treated for hardness, then polished and plated.

The Master Spoke Wrench is an investment cast workhorse poured from the best steel, precisely machined, heat treated for hardness, then polished and plated.

The AV-1 allows you to hold an axle in place using a bench vise, so it will not turn while work is done on the hub.

A great time-saver! Neatly designed to self-center and drive conventional nipples quickly and easily during wheel building.

Comfortable, vinyl dipped, two-sided spoke wrench is designed to easily access Mavic fittings, including the Mavic SSC Ksyrium and Crossmax SLR wheels.

Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service.

Comfortable, vinyl dipped, double-ended spoke wrench for select Mavic wheels using the integrated M7 nipples. Smaller end fits 7-spline nipples with a 6.4mm outside spline diameter. These are found on the R-sys wheels.

A great shop accessory made to hold a wide variety of axles, spindles and any Park Tool Freewheel Remover/Lockring Tool. Made from precision extruded aluminum.

Ever had tire levers break on you? How about a steel core one, virtually unbreakable and last forever ... as reviewed here.

The TL-6 is a composite covered, steel core lever that provides smooth, scratch-free operation and superior strength to help remove even the tightest tires. Slightly longer (5.5”/14cm) than our other take-along levers. The TL-6 is perfect for use as a take-along or as an everyday bench lever.

This handy shop aid is ideal for sizing spokes, ball bearings and crank cotters. To use, just hang the head of the spoke in the oblong hole and read its length on the scale. For crank cotters and ball bearings it works just like a gauge for drill bits.

Replacement valve core for Presta valves.

For high profile rims. An advantage of this extension is the application between the valve stem and the valve itself. Protruding from the rim is the valve, not the extension. Ease of inflation, adjustment of tire pressure or deflation. Extensions are equipped with an o-ring seal, self-deflation is not possible.

Plastic valve tool works on valve cores (middle opening) and valve extensions (fork).

Innovative 3-way Y wrench featuring three different sized wrenches to fit internal spoke nipples.

Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service.